/* ----------------------------------------------------------------------------- This source file is part of OGRE (Object-oriented Graphics Rendering Engine) For the latest info, see http://www.ogre3d.org/ Copyright (c) 2000-2014 Torus Knot Software Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ----------------------------------------------------------------------------- */ #ifndef __RenderTarget_H__ #define __RenderTarget_H__ #include "OgrePrerequisites.h" #include "OgrePixelFormat.h" #include "OgreHeaderPrefix.h" /* Define the number of priority groups for the render system's render targets. */ #ifndef OGRE_NUM_RENDERTARGET_GROUPS #define OGRE_NUM_RENDERTARGET_GROUPS 10 #define OGRE_DEFAULT_RT_GROUP 4 #define OGRE_REND_TO_TEX_RT_GROUP 2 #endif namespace Ogre { /** \addtogroup Core * @{ */ /** \addtogroup RenderSystem * @{ */ /** A 'canvas' which can receive the results of a rendering operation. This abstract class defines a common root to all targets of rendering operations. A render target could be a window on a screen, or another offscreen surface like a texture or bump map etc. @author Steven Streeting */ class _OgreExport RenderTarget : public RenderSysAlloc { public: struct FrameStats { /// frames per second (FPS) based on the frames rendered in the last second float lastFPS; /// average frames per second (FPS) since call to Root::startRendering float avgFPS; /// best frames per second (FPS) since call to Root::startRendering float bestFPS; /// worst frames per second (FPS) since call to Root::startRendering float worstFPS; unsigned long bestFrameTime; unsigned long worstFrameTime; /// number of triangles rendered in the last update() call. size_t triangleCount; /// number of batches rendered in the last update() call. size_t batchCount; int vBlankMissCount; // -1 means that the value is not applicable }; enum FrameBuffer { FB_FRONT, FB_BACK, FB_AUTO }; RenderTarget(); virtual ~RenderTarget(); /// Retrieve target's name. const String& getName(void) const { return mName; } /// Retrieve information about the render target. void getMetrics(unsigned int& width, unsigned int& height); uint32 getWidth(void) const { return mWidth; } uint32 getHeight(void) const { return mHeight; } /** * Sets the pool ID this RenderTarget should query from. Default value is POOL_DEFAULT. * Set to POOL_NO_DEPTH to avoid using a DepthBuffer (or manually controlling it) @see DepthBuffer * Changing the pool Id will cause the current depth buffer to be detached unless the old * id and the new one are the same */ void setDepthBufferPool( uint16 poolId ); //Returns the pool ID this RenderTarget should query from. @see DepthBuffer uint16 getDepthBufferPool() const { return mDepthBufferPoolId; } DepthBuffer* getDepthBuffer() const { return mDepthBuffer; } //Returns false if couldn't attach virtual bool attachDepthBuffer( DepthBuffer *depthBuffer ); void detachDepthBuffer(); /** Detaches DepthBuffer without notifying it from the detach. Useful when called from the DepthBuffer while it iterates through attached RenderTargets (@see DepthBuffer::_setPoolId()) */ virtual void _detachDepthBuffer() { mDepthBuffer = 0; } /** Tells the target to update it's contents. If OGRE is not running in an automatic rendering loop (via @ref Root::startRendering), the user of the library is responsible for asking each render target to refresh. This is the method used to do this. It automatically re-renders the contents of the target using whatever cameras have been pointed at it (using @ref addViewport). This allows OGRE to be used in multi-windowed utilities and for contents to be refreshed only when required, rather than constantly as with the automatic rendering loop. @param swapBuffers If set to true, the target will immediately call @ref swapBuffers() after the update. See @ref swapBuffers() for why you might want to set this to false. */ void update(bool swapBuffers = true); /** Finalizes the frame by performing buffer swaps and MSAA resolves This method handles the end-of-frame operations required to display the rendered content. Depending on the target configuration, this includes: - Swapping the front and back buffers (if double-buffering is enabled). - Resolving the MSAA (Multisample Anti-Aliasing) surface to the displayable surface (if MSAA is enabled). @attention After this method returns, the contents of the multisample buffers are invalidated/discarded. You cannot rely on their contents for subsequent operations without re-rendering. */ virtual void swapBuffers() {} /** Adds a viewport to the rendering target. A viewport is the rectangle into which rendering output is sent. This method adds a viewport to the render target, rendering from the supplied camera. The rest of the parameters are only required if you wish to add more than one viewport to a single rendering target. Note that size information passed to this method is passed as a parametric, i.e. it is relative rather than absolute. This is to allow viewports to automatically resize along with the target. @param cam The camera from which the viewport contents will be rendered (mandatory) @param ZOrder The relative order of the viewport with others on the target (allows overlapping viewports i.e. picture-in-picture). Higher Z-orders are on top of lower ones. The actual number is irrelevant, only the relative Z-order matters (you can leave gaps in the numbering) @param rect The relative position of the viewport on the target, as a value between 0 and 1. */ Viewport* addViewport(Camera* cam, int ZOrder = 0, FloatRect rect = {0.0f, 0.0f, 1.0f, 1.0f}); /// @overload Viewport* addViewport(Camera* cam, int ZOrder, float left, float top = 0.0f, float width = 1.0f, float height = 1.0f) { return addViewport(cam, ZOrder, {left, top, left + width, top + height}); } /** Returns the number of viewports attached to this target.*/ unsigned short getNumViewports(void) const { return static_cast(mViewportList.size()); } /** Retrieves a pointer to the viewport with the given index. */ Viewport* getViewport(unsigned short index); /** Retrieves a pointer to the viewport with the given Z-order. @remarks throws if not found. */ Viewport* getViewportByZOrder(int ZOrder); /** Returns true if and only if a viewport exists at the given Z-order. */ bool hasViewportWithZOrder(int ZOrder); /** Removes a viewport at a given Z-order. */ void removeViewport(int ZOrder); /** Removes all viewports on this target. */ void removeAllViewports(void); /** Retrieves details of current rendering performance. */ const FrameStats& getStatistics(void) const { return mStats; } /** Resets saved frame-rate statistices. */ void resetStatistics(void); /** Retrieve a platform or API-specific piece of information This method of retrieving information should only be used if you know what you're doing. | Name | Description | |-------------|------------------------------------| | WINDOW | The native window handle. (X11 Window XID/ HWND / NSWindow*) | | HWND | deprecated (same as WINDOW) | | GL_FBOID | the id of the OpenGL framebuffer object | | GL_MULTISAMPLEFBOID | the id of the OpenGL framebuffer object used for multisampling | | GLFBO | id of the screen OpenGL framebuffer object on iOS | | GLCONTEXT | deprecated, do not use | | FBO | deprecated, do not use | | TARGET | deprecated, do not use | | XDISPLAY | The X Display connection behind that context. | | ATOM | The X Atom used in client delete events. | | VIEW | Cocoa NSView* | | NSOPENGLCONTEXT | Cocoa NSOpenGLContext* | | NSOPENGLPIXELFORMAT | Cocoa NSOpenGLPixelFormat* | @param name The name of the attribute. @param pData Pointer to memory of the right kind of structure to receive the info. */ virtual void getCustomAttribute(const String& name, void* pData); /** simplified API for bindings * * @overload */ uint getCustomAttribute(const String& name) { uint ret = 0; getCustomAttribute(name, &ret); return ret; } /** Add a listener to this RenderTarget which will be called back before & after rendering. If you want notifications before and after a target is updated by the system, use this method to register your own custom RenderTargetListener class. This is useful for potentially adding your own manual rendering commands before and after the 'normal' system rendering. @par NB this should not be used for frame-based scene updates, use Root::addFrameListener for that. */ void addListener(RenderTargetListener* listener); /** same as addListener, but force the position in the vector, so we can control the call order */ void insertListener(RenderTargetListener* listener, const unsigned int pos = 0); /** Removes a RenderTargetListener previously registered using addListener. */ void removeListener(RenderTargetListener* listener); /** Removes all listeners from this instance. */ void removeAllListeners(void); /** Sets the priority of this render target in relation to the others. This can be used in order to schedule render target updates. Lower priorities will be rendered first. Note that the priority must be set at the time the render target is attached to the render system, changes afterwards will not affect the ordering. */ void setPriority( uchar priority ) { mPriority = priority; } /** Gets the priority of a render target. */ uchar getPriority() const { return mPriority; } /** Used to retrieve or set the active state of the render target. */ virtual bool isActive() const { return mActive; } /** Used to set the active state of the render target. */ void setActive( bool state ) { mActive = state; } /** Sets whether this target should be automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used. By default, if you use Ogre's own rendering loop (Root::startRendering) or call Root::_updateAllRenderTargets, all render targets are updated automatically. This method allows you to control that behaviour, if for example you have a render target which you only want to update periodically. @param autoupdate If true, the render target is updated during the automatic render loop or when Root::_updateAllRenderTargets is called. If false, the target is only updated when its update() method is called explicitly. */ void setAutoUpdated(bool autoupdate) { mAutoUpdate = autoupdate; } /** Gets whether this target is automatically updated if Ogre's rendering loop or Root::_updateAllRenderTargets is being used. */ bool isAutoUpdated(void) const { return mAutoUpdate; } /** Copies the current contents of the render target to a pixelbox. @remarks See suggestPixelFormat for a tip as to the best pixel format to extract into, although you can use whatever format you like and the results will be converted. */ virtual void copyContentsToMemory(const Box& src, const PixelBox &dst, FrameBuffer buffer = FB_AUTO) = 0; /** @overload @deprecated This function is deprecated as behavior for dst.size < RenderTarget.size was inconsistent in previous versions of Ogre. Sometimes the whole rect was used as a source, sometimes the rect with the size equal to the size of destination rect but located in the top left corner of the render target, sometimes the destination rect itself. Use the overload with explicitly specified source and destination boxes instead. */ OGRE_DEPRECATED void copyContentsToMemory(const PixelBox &dst, FrameBuffer buffer = FB_AUTO) { copyContentsToMemory(Box(0, 0, mWidth, mHeight), dst, buffer); } /** Suggests a pixel format to use for extracting the data in this target, when calling copyContentsToMemory. */ virtual PixelFormat suggestPixelFormat() const { return PF_BYTE_RGBA; } /** Writes the current contents of the render target to the named file. */ void writeContentsToFile(const String& filename); /** Writes the current contents of the render target to the (PREFIX)(time-stamp)(SUFFIX) file. @return the name of the file used.*/ String writeContentsToTimestampedFile(const String& filenamePrefix, const String& filenameSuffix); virtual bool requiresTextureFlipping() const = 0; /** Utility method to notify a render target that a camera has been removed, in case it was referring to it as a viewer. */ void _notifyCameraRemoved(const Camera* cam); /** Indicates whether this target is the primary window. The primary window is special in that it is destroyed when ogre is shut down, and cannot be destroyed directly. This is the case because it holds the context for vertex, index buffers and textures. */ virtual bool isPrimary(void) const { return false; } /** Indicates whether stereo is currently enabled for this target. Default is false. */ virtual bool isStereoEnabled(void) const { return mStereoEnabled; } /** Indicates whether on rendering, linear colour space is converted to sRGB gamma colour space. This is the exact opposite conversion of what is indicated by Texture::isHardwareGammaEnabled, and can only be enabled on creation of the render target. For render windows, it's enabled through the 'gamma' creation misc parameter. For textures, it is enabled through the hwGamma parameter to the create call. */ bool isHardwareGammaEnabled() const { return mHwGamma; } /** Indicates whether multisampling is performed on rendering and at what level. */ uint getFSAA() const { return mFSAA; } /// RenderSystem specific FSAA option. See @ref RenderSystem::_createRenderWindow for details. const String& getFSAAHint() const { return mFSAAHint; } /** Set the level of multisample AA to be used if hardware support it. This option will be ignored if the hardware does not support it or setting can not be changed on the fly on per-target level. @param fsaa The number of samples @param fsaaHint @copybrief getFSAAHint */ virtual void setFSAA(uint fsaa, const String& fsaaHint) { } /** Method for manual management of rendering : fires 'preRenderTargetUpdate' and initialises statistics etc. you can use it like this for example : 
            renderTarget->_beginUpdate();
            renderTarget->_updateViewport(1); // which is not auto updated
            renderTarget->_updateViewport(2); // which is not auto updated
            renderTarget->_updateAutoUpdatedViewports();
            renderTarget->_endUpdate();
            renderTarget->swapBuffers();
Please note that in that case, the zorder may not work as you expect, since you are responsible for calling _updateViewport in the correct order. */ virtual void _beginUpdate(); /** Method for manual management of rendering - renders the given viewport (even if it is not autoupdated) This also fires preViewportUpdate and postViewportUpdate, and manages statistics. You should call it between _beginUpdate() and _endUpdate(). @see _beginUpdate for more details. @param zorder The zorder of the viewport to update. @param updateStatistics Whether you want to update statistics or not. */ void _updateViewport(int zorder, bool updateStatistics = true) { _updateViewport(getViewportByZOrder(zorder), updateStatistics); } /** Method for manual management of rendering - renders the given viewport (even if it is not autoupdated) This also fires preViewportUpdate and postViewportUpdate, and manages statistics if needed. You should call it between _beginUpdate() and _endUpdate(). @see _beginUpdate for more details. @param viewport The viewport you want to update, it must be bound to the rendertarget. @param updateStatistics Whether you want to update statistics or not. */ virtual void _updateViewport(Viewport* viewport, bool updateStatistics = true); /** Method for manual management of rendering - renders only viewports that are auto updated This also fires preViewportUpdate and postViewportUpdate, and manages statistics. You should call it between _beginUpdate() and _endUpdate(). See _beginUpdate for more details. @param updateStatistics Whether you want to update statistics or not. @see _beginUpdate() */ void _updateAutoUpdatedViewports(bool updateStatistics = true); /** Method for manual management of rendering - finishes statistics calculation and fires 'postRenderTargetUpdate'. You should call it after a _beginUpdate @see _beginUpdate for more details. */ virtual void _endUpdate(); protected: /// The name of this target. String mName; /// The priority of the render target. uchar mPriority; uint32 mWidth; uint32 mHeight; uint16 mDepthBufferPoolId; DepthBuffer *mDepthBuffer; // Stats FrameStats mStats; Timer* mTimer ; unsigned long mLastSecond; unsigned long mLastTime; size_t mFrameCount; bool mActive; bool mAutoUpdate; // Hardware sRGB gamma conversion done on write? bool mHwGamma; // FSAA performed? uint mFSAA; String mFSAAHint; bool mStereoEnabled; virtual void updateStats(void); typedef std::map ViewportList; /// List of viewports, map on Z-order ViewportList mViewportList; typedef std::vector RenderTargetListenerList; RenderTargetListenerList mListeners; /// internal method for firing events virtual void firePreUpdate(void); /// internal method for firing events virtual void firePostUpdate(void); /// internal method for firing events virtual void fireViewportPreUpdate(Viewport* vp); /// internal method for firing events virtual void fireViewportPostUpdate(Viewport* vp); /// internal method for firing events virtual void fireViewportAdded(Viewport* vp); /// internal method for firing events void fireViewportRemoved(Viewport* vp); /// Internal implementation of update() virtual void updateImpl(); }; /** @} */ /** @} */ } // Namespace #include "OgreHeaderSuffix.h" #endif